Three-dimensional numerical analysis on combustion performance and flow of hybrid rocket motor with multi-segmented grain

This paper presents the combustion characteristics in hybrid rocket motors with multi-segmented grain through three-dimensional numerical simulations. Multi-segmented grain is composed of several thin grains with two or more ports. The numerical model consists of Navier-Stokes equations with turbulence, solid fuel pyrolysis, chemical reactions, a fluid–solid coupling model and a regression rate model. The simulations adopt 90% Hydrogen Peroxide (HP) and PolyEthylene (PE) as the propellant combination. The effects of the rotation, port number, fuel grain segment number and mid-chamber length on the flow field and combustion performances are analyzed. The results indicate that the multi-segmented grain configuration can strengthen the flow field, and the regression rate and combustion efficiency are enhanced. Take the cases with two grain segments and three ports for example, the regression rate is increased by 32.4%−45.1% and the combustion efficiency increases by 6%−8.6% in different rotation angles.     

Data-driven prescribed performance control for satellite with large rotational component

In this paper, the high precision attitude control for satellite with large misaligned rotational component is investigated, proposing a novel model-free prescribed performance adaptive control (MF-PPAC) method. Based on the model-free adaptive control (MFAC) strategy, high-precision attitude control is achieved depending on the system measurement rather than the spacecraft mathematical model, which demonstrates the superiority in handling nonlinearity and uncertainty of the spacecraft system, especially for those with unbalance of the rotational component. Furthermore, the transient and the stable-state behavior of the tracking error using MFAC is constrained in the prescribed performance bounds and converges to zero gradually with the utilization of prescribed performance function (PPF) and error transformation method. Finally, the convergence and boundedness of the system error, the bounded-input bounded-output (BIBO) stability of the proposed MF-PPAC is demonstrated by the contraction mapping theory. Simulation and comparison with disturbance-observer-based PD control and MFAC illustrate the effectiveness of the proposed method.     

应用于控制力矩陀螺电源模块的线性-非线性协同控制器设计

本文对控制力矩陀螺电源的控制器进行研究,基于对线性控制器及非线性控制器的分析,设计了线性-非线性协同控制器并搭建硬件模型,在电源系统动态调整阶段采用非线性控制器,在稳态阶段采用线性控制器。该方案较单一线性控制器提升了电源系统的动态性能,并保证了系统的稳定性及可靠性。对该鲁棒控制器进行了仿真分析并搭建实物,通过实验验证了相较线性控制器,使用协同控制器的电源模块在控制状态切换时,下冲量与调节时间分别减少了45%及58%,证明了该协同控制器能够有效提升CMG电源系统的动态性能。     

变循环发动机过渡态性能直接模拟方法

为了实现多变量可调的变循环发动机（VCE）过渡态性能模拟和控制规律设计,在稳态逆算法和过渡态性能隐式格式计算方法的基础上开发了变循环发动机过渡态直接模拟方法。在稳态逆算法模型中加入容积效应和转子动力学方程,实现了同时给定加速率、涡轮前温度和压缩部件工作点的条件下直接模拟计算过渡态过程中变几何参数和燃油流量的调节规律,验证了方法的精度和可行性,并将该方法用于变循环发动机转模态性能模拟和控制规律设计。计算结果表明,过渡态直接模拟方法的误差在0.58%以内,超声速巡航状态下由单外涵模态转换到双外涵模态的时间约为1 s,海平面静止状态下双外涵转单外涵的时间约为3 s,且推力、转速、涡轮前温度、喘振裕度等参数过渡平稳。该方法可简化转模态控制规律设计流程,并提高设计精度。     

风车状态下转子性能及通道内流动分析

为探究低展弦比压气机转子在风车状态下由压气机模式向涡轮模式转化过程中性能、内部流场结构以及气动损失的演化过程,提出了一种基于叶片和流体间能量传递的简化数值计算方法,以获得某转速下的风车状态临界流量点。在数值模拟的基础上,重点对比了同一转速线上压气机工况点(小流量工况)、风车临界点和涡轮工况点下叶尖泄漏损失的演化机制,同时探究了叶片通道内流动分离的演化过程。 结果显示,随着转速的增加,转子风车状态临界流量呈现近似线性的变化趋势。而同转速下随流量增大,叶尖泄漏流从吸力面流向压力面,并与压力面上的低能量流体进行掺混,造成了流动堵塞。同时,从压气机模式转向涡轮模式的过程中,叶尖区域的流动分离从吸力面分离转变为压力面分离,随后分离强度和尺寸逐渐增大,造成的气动损失显著增加;而在轮毂区域,流动分离始终保持吸力面分离,其分离尺度沿径向有所发展。     

发动机唇口电热防冰系统性能仿真

采用三维耦合传热方法对发动机唇口电热防冰系统进行了多状态下的性能仿真,获得了唇口表面平衡温度及动态温升响应时间,以此评估防冰系统性能,并通过与冰风洞试验结果对比,对仿真过程进行了修正。研究表明:唇口表面加热区平衡温度均高于273.15 K,温升响应时间小于60 s,满足防冰需要,较为严酷的防冰状态点主要为飞行速度较大、环境温度较低的状态点;修正唇口材料导热系数后,仿真与试验结果吻合良好。研究结果能有效指导工程研制,对提高防除冰仿真分析结果的准确性提供了很好的借鉴。     

退化量有缺失的无失效小样本轴承可靠性评估

针对有试验性能退化量参数记录、且(或)有部分数据缺失情况的小样本无失效轴承试验问题,通过由Taylor和Thompson提出的数据模拟法实现补全样本退化量,结合Bootstrap自助法扩大样本量,再根据基于性能退化轨迹的补充信息方法来进行其可靠性评估。选取7组受试轴承的振动退化量,对比在完整数据和带有缺失数据情况下的分析结果,发现可合理利用原舍弃不合规试验的部分有效信息,使之增加可靠性评估的样本数,从而得到较不用这些数据更为准确的结果,且所得结果较用完整数据结果绝对值相差在01以内。对比由极大似然估计法和加权E-Bayes法分析试验寿命数据的结果,发现该方法所得评估结果更优,与试验实际相比误差在10%以内,对于提高评估精度及降低试验成本有积极的实际意义。     

Water takeoff performance calculation method for amphibious aircraft based on digital virtual flight

Owing to the strong coupling among the hydrodynamic forces, aerodynamic forces and motion of amphibious aircraft during the water takeoff process, the water takeoff performance is difficult to calculate accurately and quickly. Based on an analysis of the dynamics and kinematics characteristics of amphibious aircraft and the hydrodynamic theory of high-speed planing hulls, a suitable mathematical model is established for calculating the hydrodynamics of aircraft during water takeoff. A pilot model is designed to illustrate how pilots are affected by the lack of visual reference and the necessity to simultaneously control the pitch angle, flight velocity and other parameters during water takeoff. Combined with the aerodynamic model, engine thrust model and aircraft motion model, a digital virtual flight simulation model is developed for amphibious aircraft during water takeoff, and a calculation method for the water takeoff performance of amphibious aircraft is proposed based on digital virtual flight. Typical performance indicators, such as the liftoff time and liftoff distance, can be obtained via digital virtual flight calculations. A comparison of the measured flight test data and the calculation results shows that the calculation error is less than 10%, which verifies the correctness and accuracy of the proposed method. This method can be used for the preliminary evaluation of airworthiness compliance of amphibious aircraft design schemes, and the relevant calculation results can also provide a theoretical reference for the formulation of flight test plans for airworthiness certification.     

燃气轮机燃烧室预混喷嘴排放性能的试验和数值研究

为了研究当量比、值班燃料量和压力对燃气轮机燃烧室预混喷嘴排放指标的影响,在环境压力下按照等速模化原理进行了燃烧室预混喷嘴的燃烧试验,基于化学反应网络法构建了污染物预测模型,开展了试验和数值对比研究。结果表明:在带值班燃料的情况下该预混喷嘴当量比φ在0.35～0.5时可满足国标排放要求,但是值班燃料量增大会使NO_x排放升高;在φ0.4时,压力对纯预混燃烧NO_x生成无影响,φ0.4时,NO_x会随压力升高而增多;带有值班燃料的预混燃烧时,NO_x对压力变化敏感,压力升高导致NO_x增多;该预混喷嘴混合性能对空气流速不敏感、燃料兼容性强,排放达标当量比范围宽,经进一步设计开发后有潜力应用于燃气轮机低排放燃烧室中。该化学反应器网络模型依赖经验较少,当值班燃料比例≤0.17时,对污染物预测与试验数据符合较好。     

航空发动机高原起动性能改善措施

为了解决航空发动机高原起动超温和转速悬挂等问题,以某型航空发动机起动过程为研究对象,根据高原环境对发动机起动过程的影响进行理论分析,提出了优化高原起动措施,并进行了高原试验验证,摸索出各措施对起动过程的影响程度。结果表明:在发动机起动过程中采用飞机卸载的方式可使排气温度降低3%,起动机脱开转速提高3%;起动机功率提高约1%,点火转速及脱开转速提高约2%,起动时间缩短约8%。